 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com IDC05S60C 2nd generation thinQ!TM SiC Schottky Diode FEATURES: * * * * * * Revolutionary semiconductor material Silicon Carbide Switching behavior benchmark No reverse recovery No temperature influence on the switching behavior No forward recovery High surge current capability Applications: * SMPS, PFC, snubber C A Chip Type IDC05S60C VBR 600V IF 5A Die Size 1.45 x 1.162 mm2 Package sawn on foil MECHANICAL PARAMETER: Raster size Anode pad size Area total / active Thickness Wafer size Flat position Max. possible chips per wafer Passivation frontside Anode metalization Cathode metalization Die bond Wire bond Reject Ink Dot Size Recommended Storage Environment .com 1.45x 1.162 mm 1.213 x 0.925 1.68 / 1.22 355 75 0 2182 pcs Photoimide 3200 nm Al mm m mm deg 2 DataSh ee 1400 nm Ni Ag -system suitable for epoxy and soft solder die bonding Electrically conductive glue or solder Al, 350m 0.3 mm store in original container, in dry nitrogen, < 6 month at an ambient temperature of 23C .com Edited by INFINEON Technologies, AIM PMD D CID CLS, Edition 1, 05.04.2006 DataSheet 4 U .com www..com IDC05S60C Maximum Ratings Parameter Repetitive peak reverse voltage DC blocking voltage Continuous forward current limited by Tjmax Surge non repetitive forward current sine halfwave Symbol V RRM V DC IF IF,SM I F,RM I F,max Tj , Ts t g Condition Value 600 600 5 Unit V TC =25 C, tP =10 ms TC = 100 C, T j = 1 5 0 C, D=0.1 TC =25 C, tp=10s 42 21 180 -55...+175 A Repetitive peak forward current limited by Tjmax Non-repetitive peak forward current Operating junction and storage temperature C Static Electrical Characteristics (tested on chip), Tj=25 C, unless otherwise specified t4U.com Value min. Typ. 0.6 1.5 max. 70 1.7 Parameter Reverse current Diode forward voltage Symbol IR VF .com Conditions V R =600V I F = 5A Tj= 2 5 C Tj= 2 5 C Unit A V DataSh ee Dynamic Electrical Characteristics, at Tj = 25 C, unless otherwise specified, tested at component Parameter Symbol Conditions Value min. Typ. 12 max. Unit Total capacitive charge QC I F <=I F , m a x di/dt=200A/s V R =400V Tj = 150 C nC Switching time 1) tc Tj = 150 C <10 ns V R = 1V Total capacitance C f=1MHz 240 30 30 pF V R = 3 0 0V V R = 600V 1) tc is the time constant for the capacitive displacement current waveform (independent from Tj, ILOAD and di/dt), different from trr which is dependent on Tj, ILOAD and di/dt. No reverse recovery time constant trr due to absence of minority carrier injection . .com Edited by INFINEON Technologies, AIM PMD D CID CLS, Edition 1, 05.04.2006 DataSheet 4 U .com www..com IDC05S60C CHIP DRAWING: t4U.com .com DataSh ee .com Edited by INFINEON Technologies, AIM PMD D CID CLS, Edition 1, 05.04.2006 DataSheet 4 U .com www..com IDC05S60C FURTHER ELECTRICAL CHARACTERISTICS: This chip data sheet refers to the device data sheet INFINEON TECHNOLOGIES IDT05S60C Description: AQL 0,65 for visual inspection according to failure catalog Electrostatic Discharge Sensitive Device according to MIL-STD 883 Test-Normen Villach/Pruffeld Published by Infineon Technologies AG 81726 Munich, Germany (c) Infineon Technologies AG 2000 All Rights Reserved t4U.com .com Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. .com Edited by INFINEON Technologies, AIM PMD D CID CLS, Edition 1, 05.04.2006 DataSheet 4 U .com |
Price & Availability of IDC05S60C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |